(866) 967-DUMP info@ez-dumper.com

Aluminum Dump Inserts

EZ_Dumper Aluminum Dump Insert
DescriptionPhotosTechnical Specs - 8' Aluminum Dump InsertTechnical Specs - 6' Aluminum Dump InsertBrochureOwner's Manual

The EZ-Dumper Aluminum Dump Inserts are the perfect solution for landscapers, general contractors and handy homeowners. It bolts directly to most full-size pickup trucks in about two hours with few or no alterations. It dumps and lowers using a 12V Monarch Hydraulic Double-Acting Pump that is connected directly to your truck’s battery. It is also available in a 6’ model that fits most short bed trucks and has a payload capacity of 1.5 cubic yards!

Easy to Install and Operate

All you need are a few common tools. No alterations are needed for most trucks. Simply slide the EZ-Dumper into your truck bed, secure it with bolts in the holes already on your truck, and you’re ready to go. To empty a payload, just open the tailgate and push the button on your remote. The EZ-Dumper lifts to an angle of 51 degrees in about 15 seconds for quick and clean unloading.

Features

  • 6,000lb Lift Capacity
  • 1/8″ Aluminum Sides
  • 3/16″ Aluminum Deck
  • Expansion Stake Pockets (outside)
  • Flat Bar Rub Rails
  • Natural Aluminum Finish
  • Turn Your Pickup into a Dump Truck in About 2 Hours without the Overhead Expense
  • Removable, Double-acting Tailgate Lets You Dump, Then Spread What You Dump
  • Backed by the Best Warranty in the Industry: Two Years of Front-to-Tailgate, Parts and Labor
  • Fits Most Full Size Trucks
  • Perfect for Landscapers, General Contractors and Handy Homeowners
Specifications

Insert Type EZ0012TAL 8′ Aluminum Dump Insert
Bed Length 96″
Unloaded Weight 536 lb
Payload Capacity 6000 lb
Volume Capacity 2 Cubic Yards
Dump Angle 51 Degrees
Frame Construction Structural Steel Angle
Side Thickness 1/8″ Aluminum
Deck Thickness 3/16″ Aluminum
Tailgate Double-Acting Removable Spreader
Energy Source Truck Battery
Power Unit Double Acting Monarch Pump
Cylinder(s) Mounted Under Unit
Hydraulics Power Up/Power Down
Remote Control Standard
Tie-down Features Full Length Flat Bar Rub Rails
Expansion Features 8 Stake Pockets (outside)
Lubrication Thread in Grease Fittings on Pivots
Installation Four Bolt-Down Clamps
Standard Color Aluminum
Warranty 2 Years Front to Tailgate
Available Options

  • Aluminum Cab Protector
  • Tarp Kit
  • 20″ High Aluminum Side and Tailgate Extensions
  • 12″ High Aluminum Side Extension Bracket Kit (holds 2×12 board)
  • 19″ High Aluminum Side Extension Bracket Kit (holds 2×12 board)
  • Coal Chute Spreader Tailgate
Specifications

Insert Type EZ0012AL-SB 6′ Aluminum Dump Insert
Bed Length 74-1/8″
Unloaded Weight 528 lb (includes cab protector and tarp kit)
Payload Capacity 6000 lb
Volume Capacity 1.5 Cubic Yards
Dump Angle 51 Degrees
Frame Construction Structural Steel Angle
Side Thickness 1/8″ Aluminum
Deck Thickness 3/16″ Aluminum
Tailgate Double-Acting Removable Spreader
Energy Source Truck Battery
Power Unit Double Acting Monarch Pump
Cylinder(s) Mounted Under Unit
Hydraulics Power Up/Power Down
Remote Control Standard
Tie-down Features Full Length Flat Bar Rub Rails
Expansion Features 6 Stake Pockets (outside)
Lubrication Thread in Grease Fittings on Pivots
Installation Four Bolt-Down Clamps
Standard Color Aluminum
Warranty 2 Years Front to Tailgate
Available Options

  • Aluminum Cab Protector
  • Tarp Kit
  • 20″ High Aluminum Side and Tailgate Extensions
  • 12″ High Aluminum Side Extension Bracket Kit (holds 2×12 board)
  • 19″ High Aluminum Side Extension Bracket Kit (holds 2×12 board)
  • Coal Chute Spreader Tailgate
Real Time Web Analytics