EZ0012T 8 Foot Dump Insert
The EZ-Dumper Dump Insert is the perfect solution for landscapers, general contractors and handy homeowners. It bolts directly to most full-size pickup trucks in about two hours with few or no alterations. It dumps and lowers using a 12V Monarch Hydraulic Double-Acting Pump that is connected directly to your truck’s battery. It is also available in a 6’ model that fits most short bed trucks and has a payload capacity of 1.5 cubic yards!
Easy to Install and Operate
All you need are a few common tools. No alterations are needed for most trucks. Simply slide the EZ-Dumper into your truck bed, secure it with bolts in the holes already on your truck, and you’re ready to go. To empty a payload, just open the tailgate and push the button on your remote. The EZ-Dumper lifts to an angle of 48 degrees in under 30 seconds for a quick and clean unloading.
- The Original Hydraulic Dump Insert for Trucks (Since 1972)
- 4’¼” Wide x 8’ Long
- 6,000lb GVWR
- 5,200lb Payload Capacity
- 12 Gauge Floor
- 14 Gauge Sides
- 8 Stake Pockets (outside)
- Flat Bar Rub Rails
- Powder Coat Black (Colors Optional)
- 2 Cubic Yards of Capacity (Upgradable to 5 Cubic Yards with Mounted Sideboads and Cab Protector)
- Turn Your Pickup into a Dump Truck in About 2 Hours without the Overhead Expense
- Removable, Double-acting Tailgate Lets You Dump, Then Spread What You Dump
- Backed by the Best Warranty in the Industry: Two Years of Front-to-Tailgate, Parts and Labor
- Fits Most Full Size Trucks, Short Bed Truck Insert Also Available (EZ0012TSB)
- Perfect for Landscapers, General Contractors and Handy Homeowners
- Available in 8ft and 6ft lengths or Custom built for a Utility Truck Body.
- Stainless Steel or Aluminum
- Hauls up to 6,000 pounds
- 12 Gauge Steel Floor
- 14 Gauge Steel Sides
- 4 Bolt-Down Clamps
- 8 Stake Pockets
- Full Length Rub Rail
- Single Mounted Hoist and Pump
- Double-Acting Removable Tailgate
- 12V Double Acting Pump & Cylinder
- Power Up and Power Down
- Remote Control
- Thread in Grease Fitting on Pivots
- Two-Year Front-to-Tailgate: Parts and Labor Warranty
- Installs in Two Hours (w/Standard Hand and Power Tools)
| Insert Type | EZ0012T 8 foot Dump Insert |
| Bed Length | 8 |
| Unloaded Weight | 787lb |
| Payload Capacity | 6000lb |
| Empty Weight | 787lb |
| Volume Capacity | 2 Cubic Yards |
| Dump Angle | 48 Degrees |
| Frame Construction | Structural Steel Angle |
| Side Steel | 14 Gauge |
| Deck Steel | 12 Gauge |
| Tailgate | Double-Acting Removable Spreader |
| Energy Source | Truck Battery |
| Power Unit | Double Acting Monarch Pump |
| Cylinder(s) | Mounted Under Unit |
| Hydraulics | Power Up/Power Down |
| Remote Control | Standard |
| Tie-down Features | Full Length Flat Bar Rub Rails |
| Expansion Features | 8 Stake Pockets (outside) |
| Lubrication | Thread in Grease Fittings on Pivots |
| Installation | Four Bolt-Down Clamps |
| Color | Powder Coat Black |
| Warranty | 2 Years Front to Tailgate |