EZ0012TSB 6 Foot Short Bed Insert
The 6 ' EZ-Dumper Dump Insert is the perfect solution for landscapers, general contractors and handy homeowners. It bolts directly to most short bed pickup trucks in about two hours with few or no alterations. It dumps and lowers using a 12V Monarch Hydraulic Double-Acting Pump that is connected directly to your truck’s battery. It is also available in a 8’ model that fits most full-size trucks and has a payload capacity of 2 cubic yards!
Easy to Install and Operate
All you need are a few common tools. No alterations are needed for most trucks. Simply slide the EZ-Dumper into your truck bed, secure it with bolts in the holes already on your truck, and you’re ready to go. To empty a payload, just open the tailgate and push the button on your remote. The EZ-Dumper lifts to an angle of 48 degrees in under 30 seconds for a quick and clean unloading.
- The Original Hydraulic Dump Insert for Trucks (Since 1972)
- Total Bottom Frame Length: 76"Maximum Inside Bed Length: 75.9"
- 6,000lb Payload Capacity
- 12 Gauge Floor
- 14 Gauge Sides
- 6 Stake Pockets (outside)
- Flat Bar Rub Rails
- Powder Coat Black (Colors Optional)
- Turn Your Pickup into a Dump Truck in About 2 Hours without the Overhead Expense
- Removable, Double-acting Tailgate Lets You Dump, Then Spread What You Dump
- Backed by the Best Warranty in the Industry: Two Years of Front-to-Tailgate, Parts and Labor
- Fits Most Short Bed Size Trucks
- Perfect for Landscapers, General Contractors and Handy Homeowners
- Available in 8ft and 6ft lengths or Custom built for a Utility Truck Body.
- Stainless Steel or Aluminum
- Hauls up to 6,000 pounds
- 12 Gauge Steel Floor
- 14 Gauge Steel Sides
- 4 Bolt-Down Clamps
- 6 Stake Pockets
- Full Length Rub Rail
- Single Mounted Hoist and Pump
- Double-Acting Removable Tailgate
- 12V Double Acting Pump & Cylinder
- Power Up and Power Down
- Remote Control
- Thread in Grease Fitting on Pivots
- Two-Year Front-to-Tailgate: Parts and Labor Warranty
- Installs in Two Hours (w/Standard Hand and Power Tools)
| Insert Type | EZ0012TSB Short Bed Insert |
| Unloaded Weight | 691 |
| Payload Capacity | 6000lb |
| Empty Weight | 691 |
| Volume Capacity | 1.5 Cubic Yards |
| Dump Angle | 48 degree |
| Frame Construction | Structural Steel Angle |
| Side Steel | 14 Gauge |
| Deck Steel | 12 Gauge |
| Tailgate | Double-Acting Removable Spreader |
| Energy Source | Truck Battery |
| Power Unit | Double Acting Monarch Pump |
| Cylinder(s) | Mounted Under Unit |
| Hydraulics | Power Up/Power Down |
| Remote Control | Standard |
| Tie-down Features | Full Length Flat Bar Rub Rails |
| Expansion Features | 6 Stake Pocets (Outside) |
| Lubrication | Thread in Grease Fittings on Pivots |
| Installation | Four Bolt-Down Clamps |
| Color | Powder Coat Black |
| Warranty | 2 Years Front to Tailgate |