EZ001AT Aluminum Insert
Inserts
EZ0012T
EZ0012TSB
EZ0012TSS
EZ001AT
EZU0012T
The EZ-Dumper Dump Insert is the perfect solution for landscapers, general contractors and handy homeowners. It bolts directly to most full-size pickup trucks in about two hours with few or no alterations. It dumps and lowers using a 12V Monarch Hydraulic Double-Acting Pump that is connected directly to your truck’s battery. It is also available in a 6’ model that fits most short bed trucks and has a payload capacity of 1.5 cubic yards!
Easy to Install and Operate
All you need are a few common tools. No alterations are needed for most trucks. Simply slide the EZ-Dumper into your truck bed, secure it with bolts in the holes already on your truck, and you’re ready to go.
EZ001AT Features
Standard Features
- Available in 8ft and 6ft lengths or Custom built for a Utility Truck Body.
- Steel or Stainless Steel also Available
- Hauls up to 6,000 pounds
- 10 Gauge Floor
- 12 Gauge Sides
- 4 Bolt-Down Clamps
- 8 Stake Pockets
- Full Length Rub Rail
- Single Mounted Hoist and Pump
- Double-Acting Removable Tailgate
- 12V Double Acting Pump & Cylinder
- Power Up and Power Down
- Remote Control
- Thread in Grease Fitting on Pivots
- Two-Year Front-to-Tailgate: Parts and Labor Warranty
- Installs in Two Hours (w/Standard Hand and Power Tools)
| Insert Type | EZ001AT |
| Unloaded Weight | 545lb |
| Payload Capacity | 6000lb |
| Volume Capacity | 2 Cubic Yards |
| Dump Angle | 48 degrees |
| Side Steel | 12 Gauge |
| Deck Steel | 10 Gauge |
| Tailgate | Double-Acting Removeable Spreader |
| Energy Source | Truck Battery |
| Power Unit | Double Acting Monarch Pump |
| Cylinder(s) | Mounted Under Unit |
| Hydraulics | Power Up/Power Down |
| Remote Control | Standard |
| Tie-down Features | Full Length Flat Bar Rub Rails |
| Expansion Features | 8 Stake Pockets (outside) |
| Lubrication | Thread in Grease Fittings on Pivots |
| Installation | Four Bolt-Down Clamps |
| Color | Aluminum |
| Warranty | 2 Years Front to Tailgate |