EZ-Dumper® inserts are tough. Our products are designed, engineered and manufactured to deliver dependable performance in tough conditions and extreme environments – the perfect solution for safely & efficiently moving any load from one jobsite to another.
Made from steel or stainless steel construction, our inserts are available in standard 8’ size with 2 cubic yard capacity to fit most full-size pickups, and smaller 6’ model with 1.5 cubic yard payload capacity available to fit most short-bed trucks. EZ-Dumper® inserts are designed and manufactured to perform.
Technical Specs - 8' Steel Insert | |
---|---|
Insert Type | EZ0012T 8′ Dump Insert |
Bed Length | 96″ |
Unloaded Weight | 787 lb |
Payload Capacity | 6000 lb |
Volume Capacity | 2 Cubic Yards |
Dump Angle | 51 Degrees |
Frame Construction | Structural Steel Angle |
Side Steel | 14 Gauge |
Deck Steel | 12 Gauge |
Tailgate | Double-Acting Removable Spreader |
Energy Source | Truck Battery |
Power Unit | Double Acting Monarch Pump |
Cylinder(s) | Mounted Under Unit |
Hydraulics | Power Up/Power Down |
Remote Control | Standard |
Tie-down Features | Full Length Flat Bar Rub Rails |
Expansion Features | 8 Stake Pockets (outside) |
Lubrication | Thread in Grease Fittings on Pivots |
Installation | Four Bolt-Down Clamps |
Standard Color | Powder Coat Black |
Warranty | 2 Years Front to Tailgate |
Technical Specs - 6' Steel Insert | |
---|---|
Insert Type | EZ0012TSB 6′ Dump Insert |
Bed Length | 74-1/8″ |
Unloaded Weight | 691 lb |
Payload Capacity | 6000 lb |
Volume Capacity | 1.5 Cubic Yards |
Dump Angle | 51 Degrees |
Frame Construction | Structural Steel Angle |
Side Steel | 14 Gauge |
Deck Steel | 12 Gauge |
Tailgate | Double-Acting Removable Spreader |
Energy Source | Truck Battery |
Power Unit | Double Acting Monarch Pump |
Cylinder(s) | Mounted Under Unit |
Hydraulics | Power Up/Power Down |
Remote Control | Standard |
Tie-down Features | Full Length Flat Bar Rub Rails |
Expansion Features | 6 Stake Pockets (outside) |
Lubrication | Thread in Grease Fittings on Pivots |
Installation | Four Bolt-Down Clamps |
Standard Color | Powder Coat Black |
Warranty | 2 Years Front to Tailgate |
Steel Cab Protector
Tarp Kit
20″ High Steel Side and Tailgate Extensions
12″ High Steel Side Extension Bracket Kit (holds 2×12 board)
19″ High Steel Side Extension Bracket Kit (holds 2×12 board)
Coal Chute Spreader Tailgate