The EZ-Dumper Dump Insert is the perfect solution for landscapers, general contractors and handy homeowners. It bolts directly to most full-size pickup trucks in about two hours with few or no alterations. It dumps and lowers using a 12V Monarch Hydraulic Double-Acting Pump that is connected directly to your truck’s battery. It is also available in a 6’ model that fits most short bed trucks and has a payload capacity of 1.5 cubic yards!
Easy to Install and Operate
All you need are a few common tools. No alterations are needed for most trucks. Simply slide the EZ-Dumper into your truck bed, secure it with bolts in the holes already on your truck, and you’re ready to go. To empty a payload, just open the tailgate and push the button on your remote. The EZ-Dumper lifts to an angle of 51 degrees in about 15 seconds for quick and clean unloading.
Features
- 6,000lb Lift Capacity
- 12 Gauge Floor
- 14 Gauge Sides
- Expansion Stake Pockets (outside)
- Flat Bar Rub Rails
- Natural Stainless Steel Finish
- Turn Your Pickup into a Dump Truck in About 2 Hours without the Overhead Expense
- Removable, Double-acting Tailgate Lets You Dump, Then Spread What You Dump
- Backed by the Best Warranty in the Industry: Two Years of Front-to-Tailgate, Parts and Labor
- Fits Most Full Size Trucks
- Perfect for Landscapers, General Contractors and Handy Homeowners
| Insert Type | EZ0012TSS 8′ Stainless Steel Dump Insert |
| Bed Length | 96″ |
| Unloaded Weight | 777 lb |
| Payload Capacity | 6000 lb |
| Volume Capacity | 2 Cubic Yards |
| Dump Angle | 51 Degrees |
| Frame Construction | Structural Stainless Steel Angle (Top Frame) |
| Side Steel | 14 Gauge |
| Deck Steel | 12 Gauge |
| Tailgate | Double-Acting Removable Spreader |
| Energy Source | Truck Battery |
| Power Unit | Double Acting Monarch Pump |
| Cylinder(s) | Mounted Under Unit |
| Hydraulics | Power Up/Power Down |
| Remote Control | Standard |
| Tie-down Features | Full Length Flat Bar Rub Rails |
| Expansion Features | 8 Stake Pockets (outside) |
| Lubrication | Thread in Grease Fittings on Pivots |
| Installation | Four Bolt-Down Clamps |
| Standard Color | 304 Stainless Steel (Unfinished) |
| Warranty | 2 Years Front to Tailgate |
- Stainless Steel Cab Protector
- Tarp Kit
- 20″ High Stainless Steel Side and Tailgate Extensions
- 12″ High Stainless Steel Side Extension Bracket Kit (holds 2×12 board)
- 19″ High Stainless Steel Side Extension Bracket Kit (holds 2×12 board)
- Coal Chute Spreader Tailgate
| Insert Type | EZ0012TSS-SB 6′ Dump Insert |
| Bed Length | 74-1/8″ |
| Unloaded Weight | 690 lb |
| Payload Capacity | 6000 lb |
| Volume Capacity | 1.5 Cubic Yards |
| Dump Angle | 51 Degrees |
| Frame Construction | Structural Stainless Steel Angle (Top Frame) |
| Side Steel | 14 Gauge |
| Deck Steel | 12 Gauge |
| Tailgate | Double-Acting Removable Spreader |
| Energy Source | Truck Battery |
| Power Unit | Double Acting Monarch Pump |
| Cylinder(s) | Mounted Under Unit |
| Hydraulics | Power Up/Power Down |
| Remote Control | Standard |
| Tie-down Features | Full Length Flat Bar Rub Rails |
| Expansion Features | 6 Stake Pockets (outside) |
| Lubrication | Thread in Grease Fittings on Pivots |
| Installation | Four Bolt-Down Clamps |
| Standard Color | 304 Stainless Steel (Unfinished) |
| Warranty | 2 Years Front to Tailgate |
- Stainless Steel Cab Protector
- Tarp Kit
- 20″ High Stainless Steel Side and Tailgate Extensions
- 12″ High Stainless Steel Side Extension Bracket Kit (holds 2×12 board)
- 19″ High Stainless Steel Side Extension Bracket Kit (holds 2×12 board)
- Coal Chute Spreader Tailgate
